We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
The chemical nickel plating layer, as a highly performing coating, is highly favored by modern industries. However, during the chemical nickel plating proce...
The copper plating of printed circuit boards can be divided into two stages: primary copper plating and secondary copper plating. Among them, primary copper...
The copper plating of printed circuit boards can be divided into two stages: primary copper plating and secondary copper plating. Among them, primary copper...
The individual components of the acid copper brightener have distinct functions and work together in the electrolyte to exert a synergistic effect. If the a...
During the process of using nickel plating brightener, if the process is unreasonable and the water quality is poor, it is likely to cause the plating solut...
During the application of acid copper brightener, some electroplating factories often encounter the problem of poor brightening and leveling of the coating ...
In the production process of continuous bright tin plating additives, to achieve good coating quality, it is necessary to ensure that the concentrations of ...
An electroplating factory in Zhejiang once encountered the following problem: After the 5th battery shell was removed from the tank, it was found that the b...
When using the acid copper brightener, why is the surface finish of the middle part of the flat piece not as good as expected?
When using the nickel plating brightener, if there is excessive copper impurity in the nickel tank, since the standard electrode potential of copper is high...
