We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
To achieve proper control of the process parameters for the chemical nickel plating solution, in addition to controlling the composition of the bath solutio...
In the production process using acid copper brightener, the copper sulfate in the plating solution mainly provides copper ions to fill the solution with fre...
When using the chemical copper plating solution, if no copper layer is deposited on the inner wall of the hole, apart from the incorrect concentration of th...
An electroplating factory in Zhejiang once encountered the following problem: After the 5th battery shell was removed from the tank, it was found that the b...
When an electroplating factory uses continuous bright tin plating additives, how can they control the process parameters properly to ensure the quality of t...
Throughout the entire pre-treatment process, electrolytic degreasing is the final oil removal step, and thus it is a crucial procedure. Its success or failu...
After years of working in the electroplating industry, I have witnessed many bosses getting into a lot of trouble because they chose the wrong plating solut...
When using the trivalent chromium blue-white passivation solution, if we want to obtain a high-quality film layer, we need to control the pH value, temperat...
When poor nickel plating layers occur in the chemical nickel plating process, what kind of nickel removal agent should be selected for treatment?
When using potassium chloride as the galvanizing brightener to open a new tank, how should the potassium chloride be added? Generally speaking, it can be do...
