We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
In the electroplating production process, removing the electroless nickel layer is a common and important part. However, many users often encounter the prob...
In the production process of using nickel plating additives, when electrolytic treatment of impurities is required, how should the temperature and pH value ...
After we use alkaline zinc plating brightener to produce for a period of time, there will always be some useless things in the plating solution, even harmfu...
In the production process when we use black zinc passivation agent, sometimes the film layer of the workpiece is foggy after passivation, which is...
Mr. Xiong found that the dispersion of the workpiece coating was relatively poor when using tin plating additives. The tin coating in the low current area w...
In the hanging galvanizing process, when trivalent chrome blue zinc passivator is used for production, sometimes there will be color difference in the passi...
The electroless nickel plating solution we use is slow to plating on the workpiece, and the salt spray resistance of the coating is poor, which can only rea...
Mr. Fang received a connector for aircraft, and the workpiece coating needs 20 μm thickness.However, after electroless nickel plating on the workpiece, the ...
In the past more than a month, the matte tinned workpiece produced by Mr. Yang has been subjected to a 250 ℃ wave soldering heat test, and the tin coating h...
As we all know, in the production process of using Potassium chloride zinc plating brightener, when the zinc ion in the plating solution is insufficient, ma...
