We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
What causes blistering in acid zinc coatings? On one hand, it relates to excessive amounts of acid zinc brighteners; on the other hand, it also has a causal...
What are the specific operation methods for monitoring the quality of the coating after using electroless nickel plating solution? Why is it incorrect to on...
Why do spots appear on the coating when using potassium chloride zinc plating brightener？This is one of the common malfunction problems that many electropla...
During the process of using acid zinc plating brightener, sometimes the galvanized layer of the workpiece is prone to fogging, ranging from mild whitening t...
When we use electroless copper plating solution, if there are solid catalytic particles in the plating solution, it will affect the deposition of the coatin...
In the production process of using medium-phosphorus electroless nickel plating solution, sometimes the deposition rate of the back workpiece coating will s...
Using acid copper plating brightener, mirror bright coating can be obtained on the surface of the workpiece, and the coating has good filling and corrosion ...
In the production process of using acid zinc plating brightener, what is the reason for the blistering phenomenon of poor adhesion of the galvanized layer o...
When we use alkaline galvanizing additives for barrel plating production, sometimes the coating of the workpiece will have obvious burrs, which will affect ...
