We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
Some customers are asking, when using alkaline zinc-nickel alloy additives, in order to ensure the stability of nickel content in the coating, how to contro...
In the process of using alkaline zinc nickel alloy brightener, sometimes the pre-treatment of the workpiece is clearly very clean, but after plating the zin...
When we use alkaline zinc plating additives to produce, electrolytic treatment of plating solution is a commonly used method to remove impurities.When energ...
In the production process of using alkaline zinc plating brightener, sometimes the deposition rate of the zinc coating on the workpiece is relatively slow, ...
When using alkaline zinc plating brightener, the corrosion resistance of the workpiece coating is very important.Then, what factors are related to the corro...
In the production process of using alkaline zinc plating brightener, sometimes the plated product has poor adhesion. What is the reason for this failure?
In the production process of using barrel nickel brightener, sometimes the iron ions in the plating solution are relatively high, and the brightness of the ...
A customer has reported that during the production process using chemical nickel plating additives, the porosity of the workpiece coating is large and the c...
Some customers inquired about what problems would be caused by a too high pH value when using a copper pyrophosphate brightener.
In the previous series of articles, we mentioned that when using electroless nickel plating solution for production, Ndfeb roller plating needs to use a sma...
