We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
When using acid zinc plating additives brightener, how to control the concentration ratio of potassium chloride and zinc chloride in the plating solution?
Do you know the function and concentration control parameters of each component in the plating solution when using acid zinc plating brightener?
How can we control the current when we use alkaline galvanizing additives for barrel plating production?
When we use alkaline galvanizing additives to produce, the correct use of zinc melting tank can provide stable concentration of zinc ions and sodium hydroxi...
When we use alkaline zinc plating additives to produce, electrolytic treatment of plating solution is a commonly used method to remove impurities.When energ...
In the production process of using alkaline zinc plating brightener, sometimes the deposition rate of the zinc coating on the workpiece is relatively slow, ...
Some customers inquired about what problems would be caused by a too high pH value when using a copper pyrophosphate brightener.
We all know that the process of electroless nickel plating is different from other electroplating processes, and the requirements for pre-treatment are also...
Many customers encounter this problem during the production process of galvanized color passivation agents.
When we use nickel plating brighteners, we always encounter such a phenomenon: the workpiece is very clean in the pretreatment, but the plating layer has pi...
