We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
The correct use of a plating dewatering agent can have a positive impact on the plated layer after the plated product has been rinsed in water. In this arti...
Generally, when we use potassium chloride acid zinc additive for production, the temperature of the plating solution should be controlled at 15-30 ℃, so tha...
In acid zinc plating process, the concentration of zinc ions is an important factor affecting the quality of the coating, which directly affects the adhesio...
Degreasing before plating is an indispensable step in the plating process, and is the key to ensure good adhesion and surface finish of the plated layer. Th...
Oil removal is an indispensable step in the plating process and is the key to ensuring good adhesion and surface finish of the electroplating. This article ...
When we use acid zinc plating brightener in the production process, sometimes the coating of the workpiece will appear streaks, what is going on?
When the copper pyrophosphate brightener is used in electroplating production, the plating layer is prone to streak failure, what is the cause of this, and ...
In the production of copper pyrophosphate plating process, if the pH value is high, it often affects the quality of the coating. Therefore, we need to know ...
