We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
We use decorative chrome additives to formulate the tank solution after the film, the better chrome plating solution should have 7~8cm bright range of plati...
Some customers have asked what to do if the solderability of the plated layer is unstable when we use acid tin plating brightener. In order to answer this q...
When plating with nickel brighteners, the quality of the plated layer is a concern for many process engineers. Leakage plating is one of the common failures...
Inadequate bonding of nickel-phosphorus plating can be due to a variety of reasons, and solving this problem requires diagnosing the specific cause and taki...
When aluminum workpieces are produced with electroless nickel plating solution, in order to obtain better bonding force, the pre-plating treatment of workpi...
What anode do we typically use when working with decorative chrome additives?
Alkaline copper plating can be applied directly to steel, copper alloys and zinc alloys, and the bonding of the plated layer is usually very good. However, ...
Zinc-nickel alloys are commonly used as plating materials for corrosion protection applications, and their salt spray resistance is critical for many indust...
What are the advantages of the cyanide-free galvanizing process? Let's analyze it today.
