We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
A friend consulted and said that during the production process of using nickel plating additives on their aluminum alloy workpieces, the coating of the work...
Three reasons for the brittleness of the workpiece plating layer and easy peeling off during the application of acid tin plating additives.
In the process of using acid tin plating additive, sometimes the coating of the workpiece will be rough and porous. What is the reason?
In the electroplating industry, after the workpiece is plated with tin plating brightener, the oxidized yellowing problem that occurs easily after plating h...
During the plating degreasing process, it is important to properly clean grease and dirt from the workpiece, especially from inside the blind holes, as this...
Recently a customer came to consult the pyrophosphate copper plating brightener, he is doing zinc alloy plating with cyanide-containing alkaline copper, but...
Some customers inquire that how should we detect the effect of acid copper process treatment? In the use of acid copper brightener, and how to do a good job...
A customer inquired that during the use of chromium plating additives, some workpieces will bring nickel plating solution or cleaning water containing high ...
A customer enquired that white fog is easy to appear on the coating of the hole edge or low current area of the workpiece during the production process usin...
