We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
The zincate galvanizing process results in the appearance of pockmarks in the plating, which can be caused by several different factors. Pocking is a phenom...
In the production process using alkaline galvanizing brightener, if the plating solution is contaminated with heterogeneous metal impurities and electrolyti...
Electroplating nickel and electroless nickel plating are the main methods of nickel plating, but they have obvious differences in operation process, coating...
Hard chrome additive application process, due to the hexavalent chromium layer is easy to passivate (trivalent chromium chromium plating layer in trivalent ...
Why is it not recommended to use hard chrome additives containing fluoride during the production of electroplated hard chrome? This is because of the proble...
When we use potassium chloride galvanizing brighteners for production, if there is good mixing, then it can reduce the sensitivity of the coating to impurit...
Why is the coating binding force still poor after plastic coarsening? In fact, this is related to the state of the plastic matrix. In this issue, we will di...
During the application of tin plating brightener, the plating layer is always rough, which not only affects the delivery pass rate, but also delays the prod...
In the development and use of alkaline zinc brightener, zinc oxide as an important component, its role should not be underestimated. This article will intro...
In the electroplating industry, hard chrome plating has been an indispensable surface treatment technology for many industrial fields due to its good abrasi...
