We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
When we use medium phosphorus electroless nickel plating solution to produce, sometimes the coating of the workpiece appears dull and dull. What is the reas...
In the production process of using acid zinc plating brightener, sometimes such a phenomenon occurs: the current is not adjusted very much, and the coating ...
Mr. Shi was introduced by a friend to use the medium phosphorus electroless nickel plating additive, but after using this additive, the plating solution is ...
In the production process of using alkaline zinc plating brightener, sometimes the low area of the workpiece will turn black, what should I do?
In the production process of using medium-phosphorus electroless nickel plating solution, the workpiece cannot be deposited with a nickel layer, which will ...
When we use alkaline galvanizing brightener for production, sometimes there are watermarks and water stains on the surface of the workpiece coating. What sh...
We use decorative chrome additives to formulate the tank solution after the film, the better chrome plating solution should have 7~8cm bright range of plati...
We all know that in the production process of using acid copper brighteners, the presence of monovalent copper in the plating solution will affect the brigh...
In the field of metal surface treatment, trivalent chromium blue zinc passivators are widely used due to their good corrosion resistance and environmentally...
