We are glad to share with you about the results of our work, company news, and give you timely developments and personnel appointment and removal conditions.
When we use the matte tin additive to produce, sometimes the coating of the workpiece will have black spots or black spots, which will affect the quality of...
Mr. Sun's company is a company that specializes in electroplating and processing of automotive parts. Recently, their workpieces have always experienced pee...
In the production process of alkaline galvanizing, sometimes the coating brightness of the workpiece is not enough, and the operator will add more alkaline ...
Plating plant in the production process, should have encountered this situation: that is, the entire acid copper workpiece brightness is not good, even if i...
In the chrome plating process, sometimes the surface of the workpiece produced is cracked at the tip position or edge area, which can seriously affect the a...
Electrolytic degreasing technology has been widely used in electroplating, metal processing and other fields. In this paper, we will introduce the basic pri...
When we use electroless nickel plating solution for production, because most of the reducing agents used are hypophosphite, phosphite ions will inevitably b...
Mr. Xie is the owner of a chemical nickel electroplating factory in Tianjin. His production line mainly focuses on the processing and production of high pho...
In the production process of using electroless nickel plating solution, sometimes the electroless nickel coating of the workpiece will be rough, which will ...
In the production process of using alkaline galvanizing brightener, sometimes the galvanized layer of the workpiece will appear pitted small bubbles, which ...
