Three methods to improve the stability of the plating solution during the production process using electroless nickel plating solution

2026-11-17 09:12:44

In the production process of using electroless nickel plating solution, sometimes the stability of the plating solution is poor. If not controlled properly, the plating solution will be scrapped in advance. Here are three methods to improve the stability of plating solution:

1.The plating solution for electroless nickel plating should be maintained strictly according to the process conditions. The temperature of the plating solution should be uniform during operation, not exceeding the upper limit of the process range, and should not be unloaded for a long time; The pH will increase during the production process and should be controlled within the process range; Chemical nickel plating solution should be regularly analyzed and replenished to ensure that nickel salts and hypophosphates are within the process range; The loading capacity of the plating solution should be controlled within 0.5-1.2dm2/L. Exceeding the process range will affect the quality of the coating and may also lead to the decomposition of the plating solution; Ensure the cleaning quality of the workpiece during pre-treatment, and do not allow acid, alkali, or other heavy metal impurities to enter the chemical nickel plating tank; When stopping production, it should be covered in a timely manner, and any sediment or falling into the workpiece in the plating solution should be cleaned immediately.

electroless nickel plating solution

2.Add stabilizers in a timely manner. Stabilizers can inhibit the self decomposition of electroless nickel plating solution, generally including four types: heavy metal ions, oxygen-containing acid salts, sulfur-containing compounds, and organic acid derivatives. Divalent lead compounds are widely used and can improve the stability of plating solutions. Generally, adding 0.1mg/L can take effect.

3.Control the concentration of hypophosphite ions. During the deposition process of the coating, there will be the generation of hypophosphite ions, which will accumulate and increase continuously as the reaction progresses. During the production process, three methods can be used to remove excess phosphate ions from the plating solution: updating the plating solution, increasing the pH of the plating solution through precipitation, and chemical precipitation.

So, when using electroless nickel plating solution for production, remember these three points to effectively improve the stability of the plating solution. If you would like to learn more about electroless nickel plating solutions, please feel free to call us for consultation. Our engineers at Bigely are always available to answer your questions.