These days, the customer has been asking how to control the current density effectively when using alkaline zinc nickel alloy additives to ensure the stability of nickel content in the coating?
In fact, the alkaline zinc nickel alloy process is similar to the alkaline zincate process, and as the current density increases, the current efficiency will sharply decrease. Regardless of how the ratio between zinc ions and nickel ions in the plating solution changes, they all follow this pattern: as the current density increases, the nickel content in the coating will initially increase and soon stabilize at around 13%.
Bigely Technology has conducted an analysis based on on-site experience and the characteristics of alkaline zinc nickel alloy additives. By paying attention to these two points, cathode current density can be better controlled:
1.Control the ratio of zinc ions to nickel ions. At the same current density, the smaller the ratio of zinc ions to nickel ions, the higher the nickel content in the coating and the higher the current efficiency. Good coating appearance can be achieved with current densities ranging from 1~5A/dm2, and the change in current density has little effect on the nickel content of the coating.
2.Control of plating solution operating conditions. The magnitude of cathodic current density is closely related to the concentration and temperature of the plating solution. Increasing the concentration and temperature of the plating solution appropriately can increase the cathodic current density appropriately. When the temperature is low, the conductivity of the plating solution is poor, the adsorption of additives is strong, and desorption is difficult.
The general principle for controlling cathode current density is to increase it appropriately within the allowable current density. Low current density, high brittleness of the coating, easy foaming, and the formation of positive and negative surfaces; The current density is too high, the coating crystallization is rough, and the high area is prone to burning.
In this way, controlling the current density of the cathode when using alkaline zinc nickel alloy additives can effectively reduce the occurrence of faults. If you are interested in alkaline zinc nickel alloy additives, please contact Bigely customer service for free samples and detailed technical information!