Mr. Sun from Jining, Shandong is the owner of an electroplating factory engaged in various electroplating processes. Recently, Mr. Sun found that the alignment performance of the workpiece coating was poor during the process of using alkaline zinc plating on a batch of computer casings. The thickness of the workpiece coating in the low area could not reach half of that in the high area. Mr. Sun quickly asked the brightener supplier to assist in adjusting the plating solution. But more than a month has passed, and the positioning performance of the workpiece is still very poor, so Mr. Sun plans to replace it with an alkaline zinc plating brightener with good positioning performance.
One day, Mr. Sun searched online for "Alkaline Zinc Plating Brightener Manufacturer" and found Bigley Technology to inquire if there was a high mobility alkaline zinc plating brightener suitable for his use. After understanding Mr. Sun's production situation, Bigley engineers recommend that Mr. Sun use Bigley's alkaline zinc plating brightener BZ-515.
This alkaline zinc plating brightener BZ-515 is a new product developed by Bigley's research and development team over a period of 2 years. It is produced using imported raw materials, and the workpiece can achieve good brightness and ductility performance. It has high current efficiency and can reach 85% -90% during hanging plating production. It has excellent uniform plating ability, and the thickness ratio of the high and low galvanized layer is only 1.6:1. It is suitable for the galvanizing production of various complex parts with multiple angles and deep recesses. After Mr. Sun learned about this brightener, he immediately purchased 5 barrels and went back to try it out.
Under the patient guidance of the engineer, Mr. Sun used this alkaline zinc plating brightener BZ-515 and found that the brightness of the workpiece coating was clearer than before, without fogging or blooming. Moreover, the walking performance of this brightener is very good. The thickness ratio of the high and low areas of the computer casing is around 1.6:1, which can effectively shorten the electroplating time of the workpiece, improve production efficiency, and reduce production costs by about 30%. So, Mr. Sun placed another order and signed a long-term cooperation purchase and sales contract with Bigley.
So, during the production process, when we find that the positioning performance of the coating is poor for workpieces with complex shapes such as computer casings after alkaline galvanizing, try the alkaline galvanizing brightener BZ-515 from Bigley quickly. If you are interested in this alkaline zinc plating brightener, please contact Bigley customer service for free samples and detailed technical information!
