Mr. Zhuang from Taiyuan, Shanxi is the owner of a home appliance plating factory, mainly engaged in the processing and production of various Ma steel parts for acid zinc plating. Recently, Mr. Zhuang found that the inner wall of the galvanized workpiece was not coated or blackened. However, after consulting the brightener supplier and adjusting the concentration of Potassium chloride, Zinc chloride and boric acid in the plating solution, the problem remained unsolved. So Mr. Zhuang wants to find a Potassium chloride zinc plating brightener with better performance.
On that day, Mr. Zhuang found Guangdong Bigley Technology by searching for "Potassium chloride zinc plating brightener manufacturer", asked whether there was a Potassium chloride zinc plating brightener suitable for him, and understood the reason why the inner wall of the workpiece was not coated and blackened. After understanding Mr. Zhuang's production situation, the engineer explained to Mr. Zhuang that the phenomenon of no coating, thin coating or blackening in the low current area was caused by the poor dispersal ability and deep plating ability of the brightener, and recommended Mr. Zhuang to use Potassium chloride zinc plating brightener BZ-528 from Bigley.
Bigley's Potassium chloride zinc plating brightener BZ-528 is produced with the technical support of European and American engineers and imported raw materials. The workpiece can obtain a uniform white and bright zinc coating, and the coating is soft and brittle, with good dispersion and deep plating capacity. It can be plated with bright zinc coating on the concave or hole wall in the low current area, which is very suitable for acid zinc plating of various steel substrate workpiece. After consideration, Mr. Zhuang decided to buy a small amount of this Potassium chloride zinc plating brightener to try.
Under the guidance of the engineer, after Mr. Zhuang used this Potassium chloride zinc plating brightener BZ-528, there was no phenomenon that the inner wall of the workpiece could not be plated and blackened, which greatly reduced the defective rate of the workpiece and effectively saved production costs. In addition, the current efficiency of the plating solution is high, and the deposition speed of the workpiece coating is fast, which can effectively shorten the electroplating time of the workpiece and improve production efficiency. Soon, Mr. Zhuang placed another order and signed a cooperation agreement with Bigley.
Therefore, when there is no coating or blackening on the inner wall of the workpiece in the process of barrel zinc acid plating of our malleable steel parts, we should try Bigley's Potassium chloride zinc plating brightener BZ-528 quickly to effectively reduce the defective rate of the workpiece and improve the production efficiency. If you are interested in this Potassium chloride zinc plating brightener BZ-528, please contact our customer service for free samples and detailed technical information!
